Company News - Dongguan SaiPu Electromechanical Equipment Co., Ltd.
Welcome Dongguan SaiPu Electromechanical Equipment Co., Ltd. Website

Contact Us

Addr.: No. 7 Xinmin Road, Xinmin community, Changan Town, Dongguan, Guangdong

Tel: 0769-8238 0229

Linkman: Mr. Guo

Mobile:139 2252 8451、137 9877 8012

EMail: guoyupengwei2000@163.com

Baidu
sogou
Location: Dongguan SaiPu Electromechanical Equipment Co., Ltd. >> News >> Company News >> 浏览文章

Company News

Safety operation manual of hot melt adhesive coating machine


1. avoid the hot melt adhesive coater around the volatile and explosive materials or gases, and the flammable and explosive materials can not be stored around the spraying equipment of the hot-melt coating machine.
2. do not use hot melt adhesive coater without proper protective devices, good insulators or good protection panels. Only the professional trainers can be repaired when they need to be overhauled.
3. do not operate hot melt adhesive coater under ambient temperature below 0 C and temperature above 50 C.
4. as far as possible without fast flow air. Because the combination of hot melt spray head is exposed to the rapid circulation of air, the rapid cooling will affect the flow of hot melt adhesive in the nozzle combination and easily lead to wire drawing.
5. when the hot-melt adhesive is added, it should be added before the melt glue pot and 1/3 of the hot melt glue, so as to avoid adding glue when hot melt glue is not hot melt, and it will affect the normal production.
6. the amount of supplementary glue shall not exceed eighty percent of the total volume of the hot melt glue pot.

Class: Company News
Prev: Non synchronization of paper and cloth in hot melt adhesive coating machine
Next: Introduction of medical hot-melt adhesive coating machine

Relevant Information